Konica Minolta’s new
portable upgrade kit efficiently and economically turns your current portable X-ray system into
a digital wireless solution.
The lightweight and cable free operation of the AeroDR® wireless digital flat panel detector system
allows for easy patient and image detector positioning while reducing patient discomfort and stress
during portable procedures. The AeroDR portable imaging console allows for the ability to QC the X-ray
to determine if re-exposure is needed prior to leaving the patient’s side. The built in AeroDR roaming
feature allows any AeroDR panel to be shared between portable use as well as in other general
radiography rooms. The design of the AeroDR also makes it ideal for use in surgery and operating room
The AeroDR® Portable Retrofit
unit has been designed to quickly, easily and economically turn your current portable X-ray unit
into a digital wireless solution. This unit has a very small footprint (384mm x 384mm x 72mm) and is
small enough to be installed and stored inside the cassette storage bin. It is completely
self-contained and includes two long life batteries for self-powering operation.
The CS-7 portable control station
features the same powerful yet easy to use imaging software environment as found on the CS-7 control
station used in general radiography rooms. This common user interface delivers a familiar tool that
ensures the same outstanding image quality and usability regardless of the imaging application.
Image preview is delivered in approximately 3 seconds and can be viewed prior to leaving the
patient’s side. The CS-7 portable controller can be mounted onto supported portable units using the
supplied custom mounting hardware.
Aero DR Portable Retrofit Unit
11 hours (Time of initiating the use)
Charging Time Empty to Full
Less than 10 hours off
14"x17" - 2.9 kg 17"x17" - 3.6 kg 10" x 12" - 1.7 kg